Frigate turns ordinary IP cameras into a smart security system that knows the difference between a person, a car, and a tree branch blowing in the wind. Everything runs on your own hardware, so there's no monthly cloud fee and your video never leaves your house. Paired with Home Assistant, it can turn on lights, send phone alerts with snapshots, and arm itself when you leave.
This guide covers what you actually need, the order to set it up in, and the mistakes that cost most beginners a weekend.
What you need before you start
- A Home Assistant server. A mini PC is the best fit for Frigate because video processing needs more power than small boards provide. If you run Home Assistant on a Raspberry Pi, plan to put Frigate on a separate machine.
- IP cameras that support RTSP. Reolink and Amcrest PoE cameras are reliable, affordable choices. Avoid cameras that only work through their own cloud app.
- A PoE switch. One cable carries power and data to each camera, which makes installs cleaner and more reliable than Wi-Fi cameras.
- An MQTT broker. The Mosquitto add-on in Home Assistant is the simplest option. Frigate uses it to send detections to Home Assistant.
- Optional: a detection accelerator. A Google Coral or a mini PC with a recent Intel processor makes object detection fast and keeps CPU use low.
Step 1: Give every camera a fixed IP address
Set a DHCP reservation for each camera in your router. If a camera's address changes after a power outage, Frigate loses it and your recordings stop. This one step prevents the most common "it worked yesterday" problem.
Step 2: Find each camera's two streams
Most IP cameras offer a high-resolution main stream and a low-resolution sub-stream. Use the sub-stream for detection (fast and light) and the main stream for recording (sharp video). For many Reolink cameras, the paths look like this:
rtsp://USER:PASSWORD@192.168.1.50:554/h264Preview_01_main rtsp://USER:PASSWORD@192.168.1.50:554/h264Preview_01_sub
Test both in VLC before touching Frigate. If VLC can't play it, Frigate can't either.
Step 3: A starter Frigate config
Here's a minimal config for one camera. Swap in your own IP addresses, password, and camera name. Set the detect width and height to match your camera's sub-stream resolution.
mqtt:
host: 192.168.1.10
cameras:
front_door:
ffmpeg:
inputs:
- path: rtsp://USER:PASSWORD@192.168.1.50:554/h264Preview_01_sub
roles:
- detect
- path: rtsp://USER:PASSWORD@192.168.1.50:554/h264Preview_01_main
roles:
- record
detect:
width: 640
height: 480
objects:
track:
- person
- car
record:
enabled: true
Start with one camera. Once it detects people correctly, copy the block for the rest.
Step 4: Connect Frigate to Home Assistant
Install the Frigate integration through HACS, point it at your Frigate server, and Home Assistant will create entities for each camera: live views, person and car sensors, and snapshots. Those sensors are what you build automations on.
Get the Blueprint Pack
Step 5: Draw zones so alerts mean something
Out of the box, Frigate will alert you every time a neighbor walks down the sidewalk. Use the Frigate UI to draw zones, like your driveway or porch, and only alert on people inside them. This turns a noisy system into one you actually trust.
Five mistakes that trip up beginners
- Running detection on the main stream. It overloads the CPU. Always detect on the sub-stream.
- Using Wi-Fi cameras for important views. Dropped connections mean missed recordings. Wire anything that matters.
- Recording to the same small drive as Home Assistant. Video fills drives fast. Use a dedicated drive for recordings.
- Skipping zones. Too many alerts and you'll start ignoring all of them.
- No backup power. A small UPS keeps cameras and the server recording through short outages, which is exactly when you want footage.
Is Frigate worth it?
If you want local control, no subscriptions, and detection that's smarter than most brand-name systems, yes. The setup takes an afternoon if you follow the steps in order. Once it's running, it mostly takes care of itself.
Book Remote Help, from $49
Related: 7 Home Assistant Security Automations Every Home Should Have